MAINTENANCE

1.Once a month during cooling season, inspect your cooler for leaks, blocked water lines and excessive residue build-up on the pads.

2.At the end of the season, drain the reservoir. Remove the drainpipe and let water and dirt pass through the drain fitting.

3.Lime build-up can occur in the water reservoir and on louvers. Clean this off at least once per season. If any rust or bare metal spots occur on the cabinet or louver, the metal should be sanded, primed and painted with a good quality paint.

4.If freezing weather occurs in your area, it is best to shut off the water supply at the source and drain the supply line to the cooler.

5.A cooler cover is recommended to prevent rain and weather from damaging your cooler.

6.To prevent the Shaft from rusting, coat with a wax based lubricant. Allow lubricant to dry completely and all fumes to dis- perse before turning on the cooler.

DO NOT GET WATER ON MOTOR OR PUMP MOTOR

NOTE: Depending on the mineral content of the water or the amount of air borne dust in your are, you may need to replace filter pads during the season.

It is best to replace filter pads again at the end of the season. Old filter pads soak up lime and salts, which can rust the louvers and the cabinet during the winter months.

TO REPLACE PADS

1.Remove louver (U) from cooler.

2.Unhook pad holders (V) at the sides of the louver and above and below side

pads inside cooler.

3. Remove old pads (W) and discard.

4.Tuck in rear pad to make sure hot air can not by-pass filter.

5.Place pad holders over new pad and hook into place.

6. For the side pads, center pad over louver openings in cabinet, hook pad holder below pad, tilt into place and hook at top.

WIRING DIAGRAM

TROUBLESHOOTING

Problem

Cause

Remedy

Motor cycles on and off

• Extension cord (if one used) too long

• Choose a shorter or heavier gauge cord

 

• Circuit breaker not large enough

• Consult a licensed electrician

Fails to start

• No electrical power

• Check all electrical connections and cords

 

• Circuit breaker tripped or fuse blown

• Reset circuit breaker or replace fuse

Water draining from overflow

• Float improperly adjusted

• Adjust float

Blower vibrates excessively or

• Blower wheel out of balance or out of alignment

• Replace the blower wheel

rattles

• Debris in blower housing

• Clear debris

 

 

Not cooling

• Blocked water lines

• Check incoming water line, float and water distributor

 

 

for blockages and clear.

 

• Windows opened too little or too much.

• Adjust window openings

 

• Uneven pad wetting

• Level water trays, check for blocked water slots in

 

 

water trays

 

• Pump clogged or failed

• Clean pump or replace

 

• Pads plugged with dirt and water deposits

• Replace pads

4

Page 3 Page 5
Page 4
Image 4
Essick Air N30W Maintenance, Do not GET Water on Motor or Pump Motor, To Replace Pads, Wiring Diagram Troubleshooting
Page 3 Page 5

N30W specifications

The Essick Air N30W is a stylish and efficient evaporative cooler designed to provide superior cooling performance in a variety of environments. It combines modern aesthetics with advanced technology, making it an excellent choice for homes, workshops, and outdoor spaces.

One of the most notable features of the N30W is its low energy consumption. Utilizing the principles of evaporative cooling, this unit requires significantly less electricity compared to traditional air conditioning systems. This makes it an environmentally friendly option that can help reduce energy costs while still providing a refreshing breeze during hot summer months.

The N30W boasts a large water tank capacity which allows for extended periods of continuous operation without the need for frequent refills. This feature is particularly advantageous for those who want to enjoy a cool environment without the hassle of constant maintenance. The tank is designed with easy access for filling and cleaning, ensuring that users can quickly maintain their cooler without issues.

In terms of design, the Essick Air N30W has a sleek and modern look that fits well with various home decors. Its compact size makes it easy to position in different spaces, whether in a living room, garage, or patio. The unit is designed to operate quietly, providing cooling comfort without disturbing daily activities.

Another key characteristic of the N30W is its multiple speed settings. Users can easily adjust the airflow according to their preferences, allowing for personalized comfort. The integrated fan and louver system also enable even cooling distribution throughout the area. This helps eliminate hot spots, ensuring that the entire space is adequately cooled.

The Essick Air N30W also features an indicator light that alerts users when the water level is low, preventing damage to the unit and ensuring continuous operation. The cooler is equipped with a durable exterior that can withstand varying weather conditions, making it suitable for both indoor and outdoor use.

Overall, the Essick Air N30W combines practical features, energy efficiency, and modern design into a single unit. It is ideal for those looking for an effective cooling solution that doesn’t compromise on style or performance. Whether for a home or workspace, the N30W is a reliable choice to beat the heat and enhance comfort during warm weather.
Top Page Image Contents