Dynaudio Evidence owner manual Positioning, General recommendations, Excessive Brightness, A ≤ B

Positioning

Positioning

CAUTION EXCESSIVE BRIGHTNESS

Direct sunlight or excessive brightness can affect the color of any natural wood veneer (the structural integrity of the cabinet will not be affected).

X To maintain the aesthetic quality of the loudspeakers for the long term, placing such in very warm, very cold, or very humid environments should be avoided.

					Every room will have its own particular sound characteristics. Any room is also shaped
					and decorated uniquely, and therefore remains independent regarding options for
					positioning loudspeakers. The following steps are general suggestions that will make the
					correct positioning easier to achieve.
					General recommendations
		A			Following explanations refer to Fig. 4:
					• The distance between each loudspeaker and your listening position should be the
					same (B). Try to achieve an isosceles triangle.
					• The distance between the loudspeakers should be the same or better slightly less
					than the distance between each loudspeakers and your listening position (A, B).
	B		B		• The closer the listening position is in relation to the loudspeakers, the closer the
					speakers can be positioned to each other.
					(As a starting point, it is recommended that the speakers be about 2 meters apart
					from each other for the best results (A).)
					• If the speakers are positioned too close to each other, the stereo image will not seem
					realistic; if that distance is too wide, the image may leave an acoustic hole in the
				A ≤ B	middle.
					• Paying attention to the image during listening tests will help dictate optimum
Fig. 4 Positioning the loudspeakers.					placement during experimentation and set-up.

8 Dynaudio Evidence