(1)Please check if the audio cable is connected to the audio connector properly.
(2)Check both rear side of the
There are two possible reasons:
(1)Need to be ejected by the application.
Some of the burning or playing application will lock the drive. You have to eject by application and close it so as to restore the use of panel buttons.
(2)The CD is inserted incorrectly.
Please insert a paper clip or small rod into the emergency hole on the front panel for manual ejection.
Q8.We suggest as follows:
(1)Use the burning software which is provided by original supplier and bundled with this
(2)More capacity of hard disk is needed if using hard disk as temporary buffer.
(3)Place the disc correctly.
(4)The blank disc needs full format first if using packet writing software.
Q9. “Buffer underrun” always occurs while writing discs.Here are some suggestions:
(1)Close the screen saver & TSR (Terminate and Stay Resident).
(2)Quit other redundant application when burning.
(3)Select good quality and
13