CD-WRITER 5232IM

INSTALLATION

Host Interface Connections

Most current mainboard models have two IDE ports (primary and secondary) which can connect two IDE cables. Two IDE cables allow you to connect up to four devices, but it is recommended that you separate IDE ports for your hard drive and your CD-ReWritable drive. This will ensure that your hard drive’s performance and speed won’t be affected by having the CD-RW drive on the same cable.

If you connect only one device on the cable, you can set the jumper as “master” or “slave”.

If you connect two devices (e.g. CD-ROM & CD-RW) on the same cable, set different jumpers for each device (CD-ROM as “master”, CD-RW as “slave” and vice versa.) The same rule applies to the connection of having your hard disk and one other device on the same cable.

CSEL

MASTER

SLAVE

JUMPER

3