CD-WRITER 5232IM

You may consider one of the two ways recommended below to connect your drive.

♦To get the most stable performance for the CD-RW drive to write:

Primary IDE Master: Hard Disk

Primary IDE Slave: CD-ROM Drive

Secondary IDE Master: CD-RW drive

♦For best hard disk performance:

Primary IDE Master: Hard Disk

Secondary IDE Master: CD-ROM drive

Secondary IDE Salve: CD-RW drive

Hardware Installation

1.Turn off the power to the computer system and all peripheral devices.

2.Disconnect all cables from the back of your computer, and then remove the cover from the computer.

3.Insert the CD-ReWritable drive into one of the vacant 5.25" drive bays and secure it with screws to your PC.

In order to prevent interference between the CD-ReWritable drive and the computer, please make sure to mount the drive using all four mounting screws.

4.Connect the 40-pin IDE cable from one of the IDE ports on the mainboard to the 40-pin connector of your CD-ReWritable drive. Also, connect the power supply cable to the back of the CD- ReWritable drive.

4