Making connections 9
DX-24L200A12

Using DVI (same as HDMI but requires an audio

connection)

To connect a cable or satellite box using DVI:
1Turn off your TV and all connected equipment.
2Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided), then connect it
to the DVI OUT jack on the cable or satellite box.
4Connect the other end of the HDMI cable to the
HDMI1 jack on the back of your TV.
5Connect a 3.5 mm audio cable (not provided) to the
PC AUDIO IN jack on the back of your TV and to the
AUDIO OUT jack on the cable or satellite box.
6Turn on your TV, then turn on the cable or satellite
box.
7Go through the setup wizard on page17.

Using component video (better)

To connect a cable or satellite box using component
video:
1Turn off your TV and all connected equipment.
2Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3Connect a component video cable (not provided) to
the COMPONENT IN/Y, PB, PR jacks on the back of
your TV and to the component video out jacks on
the cable or satellite box.
4Connect an audio cable (not provided) to the L and
R audio jacks on the side of your TV and to the audio
out jack on the cable or satellite TV box.
5Turn on your TV, then turn on the cable or satellite
box.
6Go through the setup wizard on page17.
Note
A DVI device must be connected to the HDMI1 jack.
If you connect a DVI device to the HDMI2 jack, you
will not hear any audio.
YP
BPRL - AUDIO - R
COMPONENT IN
ANT / CABLE
AV IN
VIDEO
HDMI2 HDMI 1 / DVI VGA PC / DVI
AUDIO IN
DIGITAL
OUTPUT
SERVICE
PORT
HDMI cable with
HDMI-DVI
adapter
3.5 mm audio cable
Cable or satellite box
Back of TV
75 ohm coaxial cable
YP
BPR L - AUDIO - R
COMPONENT IN
ANT / CABLE
AV IN
VIDEO
HDMI2 HDMI 1 / DVI VGA PC / DVI
AUDIO IN
DIGITAL
OUTPUT
SERVICE
PORT
Back of TV
Component video cable
Audio cable
Cable or satellite box
Cables are often
color-coded to match
color-coded jacks.
75 ohm coaxial cable
DX-24L200A12_11-0584_MAN_ENG_V1.book Page 9 Wednesday, September 14, 2011 12:59 PM