4Installing the stand or wall-mount bracketDX-24L200A12
Installing the stand or wall-mount bracket

Installing the stand

To install the stand:
1Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2Align the stand with the column, insert, then twist
until you hear it snap into place.

Installing a wall-mount bracket

To attach your TV to a wall-mount bracket:
1Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2Push the button marked PUSH, then rotate the
stand counterclockwise and remove it.
3Remove the six screws that secure the stand column
to the TV, then remove the column.
4Attach the wall-mount bracket to your TV using the
mounting holes on the back of your TV. See the
instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
TV components

Package contents

• Remote control and batteries (2 AAA)
• Stand with screws
• Composite cable
•Quick Setup Guide
Notes
If you plan to wall-mount your TV, do not install
the stand.
Store the stand and stand screws in case you
decide to use the stand in the future.
Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket.
Note
The length of the wall-mount screws vary depen ding
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
7.87 in. (200 mm)
3.94 in. (100 mm)
Wall mount bracket holes
DX-24L200A12_11-0584_MAN_ENG_V1.book Page 4 Wednesday, September 14, 2011 12:59 PM