10 Making connectionsDX-24L200A12
Using composite video (good)
To connect a cable or satellite box using composite
video:
1Turn off your TV and all connected equipment.
2Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3Connect a composite cable (provided) to the VIDEO,
L, and R jacks on the back of your TV and to the
composite video and audio out jacks on the cable or
satellite box.
4Turn on your TV, then turn on the cable or satellite
box.
5Go through the setup wizard on page17.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1Turn off your TV and all connected equipment.
2Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the side o f your T V and t o the
coaxial out jack on the cable or satellite box.
4Turn on your TV, then turn on the cable or satellite
box.
5Go through the setup wizard on page17.
YP
BPRL - AUDIO - R
COMPONENT IN
ANT / CABLE
AV IN
VIDEO
HDMI2 HDMI 1 / DVI VGA PC / DVI
AUDIO IN
DIGITAL
OUTPUT
SERVICE
PORT
Back of TV
Cable or satellite box
Composite cable
Cables are often
color-coded to match
color-coded jacks.
75 ohm coaxial cable
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
YP
BPR L - AUDIO - R
COMPONENT IN
ANT / CABLE
AV IN
VIDEO
HDMI2 HDMI 1 / DVI VGA PC / DVI
AUDIO IN
DIGITAL
OUTPUT
SERVICE
PORT
Cable or satellite box
Back of TV
Coaxial cable
75 ohm coaxial cable
DX-24L200A12_11-0584_MAN_ENG_V1.book Page 10 Wednesday, September 14, 2011 12:59 PM