Dynex DX-32E250A12 Changing channel settings, Automatically scanning for channels, Hiding channels, Or, CH +, MENU, Note, MENU, Cable, ENTER, Cable, ENTER, Antenna, Antenna

22 DX-32E250A12 Changing channel settings

Changing channel settings

Automatically scanning for channels

When you scan for channels, your TV searches for channels with signals and stores the channel information in the channel list. When you press CH + or CH –, your TV goes to the next or previous channel in the channel list.

If the TV signal source changes, for example you change from an outdoor antenna to cable TV (no box), you need to scan for channels.

To automatically scan for channels:

1Press MENU. The on-screen menu opens.

		PICTURE	AUDIO	SETTINGS		CHANNELS
Picture Mode		Energy Savings
Contrast							50
Brightness							50
Color							58
Tint							0
Sharpness							+10
Backlight							43
Move	Select		Menu Back		Exit	Exit

Adjust settings to affect picture quality

2Press ￿ or ￿ to highlight CHANNELS, then press ￿. The CHANNELS menu opens.

	PICTURE	AUDIO	SETTINGS	CHANNELS
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only		Off
Auto Zoom		On
Move	Select	Menu Back	Exit	Exit

Automatically search for channels.

3Press ￿ or ￿ to highlight Auto Channel Search, then press ENTER. The CHANNELS-Choose Your TV Source screen opens.

		Setup Wizard
Choose Your TV Source
Antenna	0	Digital Channels
Cable
Cable/Satellite Box	0	Analog Channels

Scanning for digital channels

Exit Exit

Channel scan may take 20+ minutes

4Press ￿ or ￿ to highlight Antenna, Cable, or Cable/Satellite Box, then press ENTER.

•If you are using an antenna for a standard or HD TV signal, select Antenna.

•If your cable is connected directly to the TV (using no tuner box), select Cable.

•If your cable is connected to your TV through a tuner box, select Cable/Satellite Box.

•If you selected Antenna or Cable, your TV searches automatically for available channels in your area and stores the channel information in the channel list. This may take several minutes. While searching, the TV displays a progress report.

Or,

If you selected Cable/Satellite Box, the channel search is not necessary.

Note

You can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list.

Hiding channels

You can hide channels in the channel list. When you press CH+ or CH-, your TV skips the hidden channels. You can still tune to a hidden channel by pressing the number buttons for the channel.

To hide channels:

1Press MENU. The on-screen menu opens.

		PICTURE	AUDIO	SETTINGS		CHANNELS
Picture Mode		Energy Savings
Contrast							50
Brightness							50
Color							58
Tint							0
Sharpness							+10
Backlight							43
Move	Select		Menu Back		Exit	Exit

Adjust settings to affect picture quality

2Press ￿ or ￿ to highlight CHANNELS, then press ￿. The CHANNELS menu opens.

	PICTURE	AUDIO	SETTINGS	CHANNELS
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only		Off
Auto Zoom		On
Move	Select	Menu Back	Exit	Exit

Manually add and skip channels in your program list

3Press ￿ or ￿ to highlight Add/Skip Channels, then press ENTER. The Channels list opens.

PICTURE AUDIO SETTINGS CHANNELS

Ch 10-0		Ch 11-1 WXIA-DT
Ch 11-2 WXIA-SD		Ch 28-1 KCET-HD
Ch 28-2 KCET-OC		Ch 28-3 KCET-Vm
Ch 28-4 KCET-W		Ch 35-1 WHD-TV
Move	Select	Menu Back	Exit Exit

Add channels to create a favorites list