Dynex DX-32E250A12 Installing the stand, Installing a wall-mountbracket, Installing the stand or wall-mountbracket, Note, Notes, Model, Warning, Screw type, Screw length

4 DX-32E250A12 Installing the stand or wall-mount bracket

Installing the stand or wall-mount bracketNotes

If you plan to wall-mount your TV, do not install the stand.

Store the stand and stand screws in case you decide to use the stand in the future.

Installing the stand

To install the stand:

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Secure the stand to the screen with the four provided screws.

Model	Screw type	Screw length
DX-32E250A12	T4 type	25 mm

Installing a wall-mount bracket

Warning

This apparatus is intended to be supported by a UL

Listed wall mount bracket.

To attach your TV to a wall-mount bracket:

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Remove the four screws that secure the stand cover and stand to the TV, then remove the stand cover and stand.

3Secure the flat stand cover to the back of your TV using the four screws you just removed.

Note

The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths.

7.84 in. (200 mm)

3.92 in. (100) mm)

Wall mount brackets