Dynex DX-32L130A10 TV components, Front and side controls, Back connections

TV components DX-32L130A10 5

TV components

Front and side controls

1

2

3

4

5

	6
7
#	Component		Description
1	MENU		Press to open the on-screen menu.
2	INPUT		Press to select the video input source.
3	VOL	/	Press to increase or decrease the volume.
4	CH	/	Press to go to the next or previous channel
			in the channel list.

5(power) button Press to turn on your TV. Press again to put

your TV in standby mode.

6	Power/Standby	Lights blue when your TV is turned on.
	indicator	Lights red when your TV is in standby mode.
7	Remote sensor	Receives signals from the remote control.
		Do not block.

Back connections
	1		2	3
			VGA	VGA
	HDMI2	HDMI1	AUDIO IN
7	AUDIO OUT
	L	R
6		L		4
		Y	PB PR	L L RR

RCOMP2

COMP1

5

#	Component	Description
1	HDMI1 and	Connect an HDMI device, such as a cable
	HDMI2 jacks	box or DVD player, to one of these jacks. An
		HDMI cable carries both video and audio,
		so you do not need to make an audio
		connection. For more information, see
		“Connecting an HDMI device” on page 10.
2	VGA AUDIO IN	Connect the mini plug from your
	jack	computer’s sound card output to this jack.
		For more information, see “Connecting a
		computer” on page 12.
3	PC VGA jack	Connect a 15-pin VGA cable from a
		computer to this jack. For more
		information, see “Connecting a computer”
		on page 12.
4	COMP2 (Y, Pb, Pr	Connect a component video device to
	and audio L and R)	these jacks. Cables are often color-coded to
	jacks	connectors. For more information, see
		“Connecting a component video device” on
		page 11.
5	AC IN	Connect the AC power cord to this
		connector.
6	COMP1 (Y, Pb, Pr	Connect a component video device to
	and audio L and R)	these jacks. Cables are often color-coded to
	jacks	connectors. For more information, see
		“Connecting a component video device” on
		page 11.
7	AUDIO OUT jacks	Connect audio cables (L and R) from these
	(L and R)	jacks to an external audio amplifier or
		receiver.