Maintenance |
Problem | Solution |
|
|
You cannot access | • If a setting or option is grayed out, it is not |
some items | available in the current input mode. |
|
|
The TV cabinet | • When you are using your TV, the |
creaks | temperature inside the cabinet increases. |
| This causes the cabinet to expand or |
| contract, causing the creaking noise. This is |
| not a malfunction. |
|
|
The buttons do not | • Unplug the power cord for a few seconds, |
work | then plug it back in and turn on your TV. |
|
|
Notes:
If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again.
Contact us by logging on to www.dynexproducts.com or by calling DYNEX Customer Service at (800)
Maintenance
Just like with any other household appliance, the performance and life- expectancy of your TV depends on how well you maintain it. Follow the procedures described here to clean the TV case and the LCD screen.
Cautions:
•Make sure that the TV is turned off and the power cord is disconnected from the power outlet before cleaning the TV.
•Never spray or pour any liquid directly onto the screen or the case.
Cleaning
•Clean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a small amount of
•Clean the screen with a clean, soft,
Specifications
Design and specifications are subject to change without notice.
Dimensions and weight are approximate.
TV model | |
TV type | LCD |
|
|
TV panel | |
|
|
TV system |
Channels | VHF: |
| |
| CATV: |
| CADTV: |
| DTV: |
| Audio multiplex BTSC system |
|
|
Audio output | 6 w x 2 |
|
|
Power | AC 120 V~60 Hz |
requirement |
|
Power | 117 W |
consumption |
|
Dimensions | 40 x 8.7 x 25.7 inches (100.5 x 22 x 65.3 cm) |
|
|
Weight | 35.3 lbs. (16 kg) |
Audio/video | Composite video/left and right audio (1) |
input | |
terminals | Component video/left and right audio (2) |
| HDMI (2) |
| VGA/audio (1) |
| ANT/CABLE in (1) |
|
|
Audio/video | Left and right audio |
output | Headphone jack (1) |
terminals | Digital coaxial audio (1) |
|
|
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced technician for help.