Adjusting the picture

DX-32L130A10 15

Navigating the menus

Press to display the on-screen menu.

MENU

 

Press to select menu items, to adjust selected

 

items, or move the on-screen cursor left or

ENTER

right.

 

ENTER

Press to select the submenu

 

items.

ENTER

Press to confirm your selection or enter a

 

submenu

EXIT

Press to close the menu or return to the

previous screen.

Selecting a channel

To select a channel:

•Press CH+ or CH- to go to the next or previous channel on the memorized channel list.

•Press the number buttons to enter the analog or digital (main) channel number you want, then wait for the channel to change, or press ENTER to change the channel immediately.

•To select a digital sub-channel, press the number buttons to select the main digital channel, then press the dot (.) button to select the sub-channel. Wait for the channel to change, or press ENTER to change the channel immediately.

Note: Button presses must be within three seconds of each other.

• Press RECALL to go to the last channel viewed.

Digital sub-channels

A digital TV signal transmits more data than an analog signal. This increase in data provides a better picture and sound with less static and interference. The increased data capacity also lets broadcasters fit several channels into the same bandwidth as an analog signal. Broadcasters may use these sub-channels to transmit a variety of information, such as weather forecasts, foreign languages, and commercials. A digital sub-channel is indicated by the main channel number, followed by a dot, then the sub-channel number. For example, 5.1 indicates sub-channel 1 of main channel 5.

Adjusting the volume

To adjust the volume:

•Press VOL+ or VOL– to increase or decrease the volume. A bar indicator and volume number shows you the change.

•Press MUTE to temporarily turn off all sound. Press MUTE again to restore the sound.

Displaying additional information

To display additional information:

•Press INFO to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution.

•Digital mode information–Displays channel number, station name, channel label (if preset), broadcast program name, TV rating, signal type, audio information, resolution, CC mode, current time, and current program start and end times.

•Analog mode information–Displays channel number, channel label (if preset), signal type, audio information, and resolution.

•Press GUIDE to display program information in a window with live program content for

the channel you are watching. Press or to scroll up or down the channels. Each time you pause at a channel, the program list will update with the program schedule for the channel and the window will show the live program for that channel. Press GUIDE or EXIT to exit this feature.

Adjusting the picture

To adjust the picture:

1Press MENU. The Main menu opens.

2Press ENTER or . The Video menu opens.

Custom

3Press or to highlight an option, then press or to adjust the option. You can adjust:

•.Picture Mode–Lets you select a preset picture mode. You can select Vivid, Standard, Theater, Energy Saving, Sport, and Custom.

•Brightness–Lets you increase or decrease the brightness of the picture. Increasing the brightness can add more light to dark areas of the picture, while decreasing the brightness can add more darkness to light areas of the picture.