24 Changing channel settingsDX-32L200NA14
•SAP—Select this option to listen to a
secondary audio program, if available.
•Reset Audio Settings—Reset all audio settings
to factory defaults.
4Press MENU to return to the previous menu, or press
EXIT to close the menu.
Changing channel settings

Automatically scanning for channels

When you scan for channels, your TV searches for
channels with signals and stores the channel information
in the channel list. When you press CH + or CH –, your TV
goes to the next or previous channel in the channel list.
If the TV signal source changes, for example you change
from an outdoor antenna to cable TV (no box), you need
to scan for channels.
To automatically scan for channels:
1Press MENU. The on-screen menu opens with the
Picture menu displayed.
2Press or to highlight Channels, then press or
ENTER. The Channels menu opens.
3Press or to highlight Auto Channel Scan, then
press ENTER. The Choose Your TV Source screen
opens.
4Press or to highlight Antenna, Cable, or
Cable/Satellite Box, then press ENTER.
• If you are using an antenna for a standard or HD
TV signal, select Antenna.
• If your cable is connected directly to the TV
(using no tuner box), select Cable.
• If yo ur cable is connected to your TV through a
tuner box, select Cable/Satellite Box.
If you selected Antenna or Cable, your TV searches
automatically for available channels in your area and
stores the channel information in the channel list.
This may take several minutes. While scanning, the
TV displays a progress report.
- Or-
If you selected Cable/Satellite Box, the channel
search is not necessary.

Hiding channels

You can hide channels in the channel list. When you press
CH + or CH –, your TV skips the hidden channels. You can
still tune to a hidden channel by pressing the number
buttons for the channel.
To hide channels:
1Press MENU. The on-screen menu opens with the
Picture menu displayed.
2Press or to highlight Channels, then press .
The Channels menu opens.
3Press or to highlight Add/Skip Channels, then
press ENTER. The channel list opens.
Note
You can also press MTS/SAP one or
more times to select the audio mode.
Note
You can pr ess EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.