10 | Making connections |
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1Turn off your TV and all connected equipment.
2Connect the incoming cable from the cable wall jack to the
3Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the side of your TV and to the coaxial out jack on the cable or satellite box.
Side of TV
Cable or satellite box
Coaxial cable
To | From cable TV |
cable TV or satellite box | wall jack (75 ohm) |
4Turn on your TV, then turn on the cable or satellite box.
5 Go through the setup wizard on page 16.
Notes
•Use a coaxial cable to eliminate interference and noise from radio waves.
•Do not bundle the coaxial cable with the power cord or other cables.
Connecting an antenna or cable TV (no box)
To connect an antenna or cable TV (no box):
1Turn off your TV and all connected equipment.
2Connect a coaxial cable to the ANT/CABLE IN jack on the side of your TV and to the antenna or cable TV wall jack.
Side of TV
Coaxial cable
3Turn on your TV.
4Go through the setup wizard on page 16.
Notes
•Use a coaxial cable to eliminate interference and noise from radio waves.
•Do not bundle the coaxial cable with the power cord or other cables.
•If the antenna is not installed correctly, contact qualified service personnel to correct the problem.