4

DX-42E250A12

Installing the stand or wall-mount bracket

Installing the stand or wall-mount bracket
Notes

If you plan to wall-mount your TV, do not install the stand.

Store the stand and stand screws in case you decide to use the stand in the future.

Installing the stand

To install the stand:

1Insert the stand column into the base plate, aligning the ridges on the column with the grooves in the base plate.

2Secure the stand column to the base plate with the six screws (SJ4, 16 mm) provided.

Stand column

Base plate

3Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

Installing a wall-mount bracket

Warning

This apparatus is intended to be supported by a UL

Listed wall mount bracket.

To attach your TV to a wall-mount bracket:

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Remove the four screws that secure the base to the stand, then remove the base.

3Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV.

Note

The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths.

15.75 in. (400 mm)

15.75 in. (400 mm)

Wall-mount brackets

4Secure the stand to the screen with the four provided screws.