Manuals / Dymo / Computer Equipment / Label Maker

Dymo LT-100T manual Troubleshooting, Solution, No display, Replace discharged batteries

Models: LT-100T

1 26

Download 26 pages 22.11 Kb

Page 20

Troubleshooting

Troubleshooting

Review the following possible solutions if you encounter a problem while using your labelmaker.

Problem/Error Message	Solution
No display	• Ensure the labelmaker is turned on.
	•	Replace discharged batteries.
Poor Print Quality	• Replace batteries or attach power adapter.
	• Ensure label cassette is installed properly.
	• Clean the print head.
	• Replace the label cassette.
Poor Cutter Performance	Clean the cutter blade. See Caring for Your
	Labelmaker.
Printing	No action required.
	Message disappears when printing is finished.
Too many characters	Delete some or all of the buffer text.
Exceeded maximum number of
characters in buffer.
Battery low	Replace batteries or connect AC power adapter.
Batteries almost discharged.
Tape Jam	• Remove jammed label; replace label cassette.
Motor is stalled due to label jam.	•	Clean cutter blade.

If you still need assistance, contact DYMO Customer Support. See Contacting Customer Support at the back of this User Guide to locate the contact number for your country.

20

T Momentum AUS.indd 20

19-03-2007 09:13:42

Image 20

Dymo LT-100T Troubleshooting, Solution, No display, Replace discharged batteries, Poor Print Quality, Clean the print head

Contents

LetraTag LT-100TUser Guide T Momentum AUS.inddÆ ß ∞ ± Figure 1 DYMO LetraTag LabelmakerLetraTag User Guide Connecting the Power Getting StartedAbout Your New Labelmaker Follow the instructions in this section to print your first labelConnecting the Optional Power Adapter Inserting the Batteries3. Replace the cover 2. Plug the other end of the power adapter into a power outlet Inserting the Label Cassette See Figure4. Close the label cassette cover and press âto turn on the power 1. Lift the label cassette cover to open the label compartmentSetting the Date and Time Selecting a Language1. Press ä keys to increase or decrease the valuePrinting Your First Label To print a labelPower Getting to Know the LabelmakerLCD Display add is visible instantlyCAPS Mode Num LockBackspace ClearCancel SettingsFormatting Your Label FormatAdding Font Styles 1. Press the ôkeyYou can choose from six different font styles AaAbCcCreating Two-Line Labels Adding the DateTo create a two-line label To insert the dateAdding Box and Underline Styles A label can be underlined or enclosed in a box, but not both together1. Press ô 2. Select Borders, and press ã 3. Select underline or a box style and press ãAdding Symbols Using Symbols and Special CharactersSymbols and other special characters can be added to your labels The labelmaker supports the extended symbol set shown belowTo insert a symbol 3. When you locate the symbol, press ãto add the symbol to your labelAdding International Characters Previewing Your Label Adjusting the Print ContrastPrinting Options Using Labelmaker Memory Storing Label TextRecalling Stored Labels 1. Press ö. The first of the memory fields is displayedCaring for Your Labelmaker 2. Remove the label cassette6. Release the cutter lever 1. Dampen a cotton ball with alcohol2. Remove the cleaning tool from inside the label compartment cover 1. Remove the label cassetteTo clean the print head T Momentum AUS.inddTroubleshooting SolutionClean the print head Clean cutter bladeSend email messages to documentation@dymo.com areas where more detail is needed, and so onDocumentation Feedback Environmental information US FCC Class B Compatibility Safety - EN 60950, IEC 950, UL Contacting Customer Support Tel. 09 229 07Tel. 1 777 49 Tel. 014 11 89Italy T Momentum AUS.indd 19-03-2007931035 2007 DYMO A Newell Rubbermaid company