Manuals / Dymo / Computer Equipment / Label Maker

Dymo LT-100T manual CAPS Mode, Num Lock, Backspace, Clear, Navigation Keys

Models: LT-100T

1 26

Page 9

CAPS Mode

The [key toggles capitalization on or off. When CAPS mode is turned on, the CAPS mode indicator is shown on the display and all letters that you enter will be capitalized. The default setting is CAPS mode on. When CAPS mode is off, all letters appear in lower case.

Num Lock

The ñkey provides access to the numbers located on some of the alphabetic keys. When Num Lock mode is turned on, the Num Lock indicator is shown on the display and the numbers 0 through

9 appear when you press the corresponding letter keys. Num Lock is turned off by default.

Backspace

The ókey removes the character to the left of the cursor.

Clear

The îkey clears all label text and formatting.

Navigation Keys

You can review and edit your label using the left and right arrow keys on the Navigation key. You can navigate through menu selections using the up and down arrow keys, and then press ãto make a selection.

T Momentum AUS.indd 9

19-03-2007 09:13:39

Page 9

Image 9

Dymo LT-100T manual CAPS Mode, Num Lock, Backspace, Clear, Navigation Keys, The îkey clears all label text and formatting

Contents

LT-100T LetraTagUser Guide T Momentum AUS.inddFigure 1 DYMO LetraTag Labelmaker LetraTag User GuideÆ ß ∞ ± Getting Started Connecting the PowerAbout Your New Labelmaker Follow the instructions in this section to print your first labelInserting the Batteries Connecting the Optional Power Adapter3. Replace the cover 2. Plug the other end of the power adapter into a power outlet See Figure Inserting the Label Cassette4. Close the label cassette cover and press âto turn on the power 1. Lift the label cassette cover to open the label compartmentSelecting a Language Setting the Date and Time1. Press ä keys to increase or decrease the valueTo print a label Printing Your First LabelGetting to Know the Labelmaker PowerLCD Display add is visible instantlyNum Lock CAPS ModeBackspace ClearSettings CancelFormatting Your Label Format1. Press the ôkey Adding Font StylesYou can choose from six different font styles AaAbCcAdding the Date Creating Two-Line LabelsTo create a two-line label To insert the dateA label can be underlined or enclosed in a box, but not both together Adding Box and Underline Styles1. Press ô 2. Select Borders, and press ã 3. Select underline or a box style and press ãUsing Symbols and Special Characters Adding SymbolsSymbols and other special characters can be added to your labels The labelmaker supports the extended symbol set shown below3. When you locate the symbol, press ãto add the symbol to your label Adding International CharactersTo insert a symbol Adjusting the Print Contrast Printing OptionsPreviewing Your Label Storing Label Text Using Labelmaker MemoryRecalling Stored Labels 1. Press ö. The first of the memory fields is displayed2. Remove the label cassette Caring for Your Labelmaker6. Release the cutter lever 1. Dampen a cotton ball with alcohol1. Remove the label cassette 2. Remove the cleaning tool from inside the label compartment coverTo clean the print head T Momentum AUS.inddSolution TroubleshootingClean the print head Clean cutter bladeareas where more detail is needed, and so on Documentation FeedbackSend email messages to documentation@dymo.com Environmental information US FCC Class B Compatibility Safety - EN 60950, IEC 950, UL Tel. 09 229 07 Contacting Customer SupportTel. 1 777 49 Tel. 014 11 89Italy 19-03-2007 T Momentum AUS.indd931035 2007 DYMO A Newell Rubbermaid company