Manuals / Dymo / Computer Equipment / Label Maker

Dymo LT-100T Caring for Your Labelmaker, Remove the label cassette, Release the cutter lever

Models: LT-100T

1 26

Page 18

Caring for Your Labelmaker

Your labelmaker is designed to give you long and trouble-free service, while requiring very little maintenance. Clean your labelmaker from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette.

To clean the cutter blade

1.Dampen a cotton ball with alcohol.

2.Remove the label cassette.

3.Place the tip of a ball-point pen or pencil on the black post as shown in Figure 6, and press the post down.

Press in and hold

Print head

4. While holding down the post, press and Figure 6 hold the cutter lever to expose the cutter blade.

5.Release the post and clean both sides of the blade with the cotton ball.

6.Release the cutter lever.

ÇYou can also follow this procedure if the cutter blade becomes lodged in the forward position and will not move.

T Momentum AUS.indd 18

19-03-2007 09:13:42

Page 18

Image 18

Dymo LT-100T Caring for Your Labelmaker, Remove the label cassette, Release the cutter lever, Press in and hold Print head

Contents

User Guide LetraTagLT-100T T Momentum AUS.inddFigure 1 DYMO LetraTag Labelmaker LetraTag User GuideÆ ß ∞ ± About Your New Labelmaker Connecting the PowerGetting Started Follow the instructions in this section to print your first label3. Replace the cover Connecting the Optional Power AdapterInserting the Batteries 2. Plug the other end of the power adapter into a power outlet 4. Close the label cassette cover and press âto turn on the power Inserting the Label CassetteSee Figure 1. Lift the label cassette cover to open the label compartment1. Press ä Setting the Date and TimeSelecting a Language keys to increase or decrease the valuePrinting Your First Label To print a labelLCD Display PowerGetting to Know the Labelmaker add is visible instantlyBackspace CAPS ModeNum Lock ClearFormatting Your Label CancelSettings FormatYou can choose from six different font styles Adding Font Styles1. Press the ôkey AaAbCcTo create a two-line label Creating Two-Line LabelsAdding the Date To insert the date1. Press ô 2. Select Borders, and press ã Adding Box and Underline StylesA label can be underlined or enclosed in a box, but not both together 3. Select underline or a box style and press ãSymbols and other special characters can be added to your labels Adding SymbolsUsing Symbols and Special Characters The labelmaker supports the extended symbol set shown below3. When you locate the symbol, press ãto add the symbol to your label Adding International CharactersTo insert a symbol Adjusting the Print Contrast Printing OptionsPreviewing Your Label Recalling Stored Labels Using Labelmaker MemoryStoring Label Text 1. Press ö. The first of the memory fields is displayed6. Release the cutter lever Caring for Your Labelmaker2. Remove the label cassette 1. Dampen a cotton ball with alcoholTo clean the print head 2. Remove the cleaning tool from inside the label compartment cover1. Remove the label cassette T Momentum AUS.inddClean the print head TroubleshootingSolution Clean cutter bladeareas where more detail is needed, and so on Documentation FeedbackSend email messages to documentation@dymo.com Environmental information US FCC Class B Compatibility Safety - EN 60950, IEC 950, UL Tel. 1 777 49 Contacting Customer SupportTel. 09 229 07 Tel. 014 11 89Italy 931035 T Momentum AUS.indd19-03-2007 2007 DYMO A Newell Rubbermaid company