Dynex DX-46L260A12 Note, AV IN, Using composite video (good), Using component video (better), To connect a cable or satellite box using component video:

Making connections DX-46L260A12 9

Using component video (better)To connect a cable or satellite box using component video:

1Turn off your TV and all connected equipment.

2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box.

3Connect a component video cable (not included) to the Y, PB, and PR jacks on the back of your TV and the component video out jacks on the cable or satellite box.

Cable or satellite box

Audio cable

Back of TV

COMPONENT IN

Component video cable

4Connect an audio cable (not included) to the L and R audio jacks on the back of your TV and to the audio out jack on the cable or satellite TV box.

Note

When you connect the audio using the L and R audio jacks, the audio output is analog.

Your TV has a digital audio jack, so you can connect the video to the component video jacks and connect the audio to the digital audio jack to get digital audio output.

5Turn on your TV, then turn on the cable or satellite box.

6 Go through the setup wizard on page 16.

Using composite video (good)To connect a cable or satellite box using composite video:

1Turn off your TV and all connected equipment.

2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box.

3Connect an A/V cable (included) to the AV IN jacks on the back of your TV and to the composite video and audio out jacks on the cable or satellite box.

Cable or satellite box

Back of TV A/V cable

Cables are often color-coded to match color-coded jacks.

COMPONENT IN

4Turn on your TV, then turn on the cable or satellite box.

5 Go through the setup wizard on page 16.