Installing the stand or wall-mount bracket 5

DX-60D260A13
Installing the stand or wall-mount bracket

Installing the stand

To install the stand:
1Carefully place your TV face-down on a cushioned,
clean surface to protect the screen from damages
and scratches.
2Secure the stand column to the stand with the four
M4 (20 mm) screws provided.
3Attach the stand assembly to the TV using the six M4
(16 mm) screws provided.

Installing a wall-mount bracket

To attach your TV to a wall-mount bracket:
1Carefully place your TV face-down on a cushioned,
clean surface to protect the screen from damages
and scratches.
2Attach the wall-mount bracket to your TV using the
mounting holes on the back of your TV. See the
instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
TV components

Package contents

• Remote control and batteries (2 AAA)
•TV stand
• M4 t ype (20 mm length) (4 pcs) to connect the stand
column to the stand base.
• M4 t ype (16 mm length) (6 pcs) to connect the stand
column to the TV.
•Stand column
QUICK SETUP GUIDE
•IMPORTANT INFORMATION
Notes
If you plan to wall-mount your TV, do not install
the stand.
Store the stand and stand screws in case you
decide to use the stand in the future.
Screw type Screw length # of screws
M4 20 mm 4
Screw type Screw length # of screws
M4 16 mm 6
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
Miscellaneous” on page 42.)
Note
The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
The mounting holes on the back of your TV take
type M6 screws.
15.75 in. (400 mm)
15.75 in. (400 mm)
Wall-mount brackets
12-1236_DX-60D260A13 MAN_V1_EN.book Page 5 Thursday, March 21, 2013 8:17 AM