Dynex dx-drtvm102 Step 4:

10 DX-DRTVM102

Need help? Call 800-305-2204

Step 4: Install the TV brackets (continued)

Option 2: Installing for a TV with an irregular or obstructed back

1Place M4/M5 spacers (16) or M6 spacers (17) over the mounting holes in the back of your TV.

2If you are using M4 or M5 screws, place M4/M5 washers (14) over the spacers.

3Align the holes you noted on the left TV bracket (02) and right TV bracket (03) with the spacers. The brackets are

marked “R” for the right bracket and “L” for the left bracket.

4Place M4/M5 washers (14) or M6 washers (15) over the holes in the TV brackets, then insert M4 screws (08),

M5 screws (10), or M6 screws (13).

5Tighten the screws until they are snug against the TV bracket. Do not over tighten.

You’ll need:

0203

16

14

17

81310

0302

14 15

OR

OR

OR

&

08 (4) 10 (4)

Phillips screwdriver

Screws

13 (4) 16 (4)

OR OROR

Washers

OR

14 (8) 15 (4)

Spacers

17 (4)

Contents

Main ASSEMBLY INSTRUCTIONS DX-DR TVM 102 Medium Low Profile Wall Mount with Optional -5 Tilt 2DX-DRTVM102 Need help? Call 800-305-2204 Safety information and specifications Need help? Call 800-305-2204 TVs the wall mount fits The wall mount fits TVs with M4, M5, or M6 screw holes that are the following distances apart: Tools needed You will need the following tools to assemble your new wall mount: Page Need help? Call 800-305-2204 Package contents: hardware Make sure you have all the hardware necessary to assemble your new wall m ount: Step 1: Step 2: Need help? Call 800-305-2204 Step 3: Step 4: Option 1: Installing for a TV with a flat back 10 DX-DRTVM102 Step 4: Option 2: Installing for a TV with an irregular or obstructed back Step 5: Step 6: Option 1: Mounting on a wood-stud wall Step 6: Option 2: Mounting on a solid concrete or concrete block wall Step 7: