Dynex dx-drtvm112 B

1Unlock the TV and bracket assembly from the wall plate by rotating the lock out of the flange slot.

2Lift the TV bracket (A) from the slotted flanges of the wall plate (B) and place it on a cushioned, clean

surface to protect the screen from damage and scratches.

3Using a Phillips screwdriver, remove the screws from the back of your TV, then remove the TV bracket.

4Using a 7/16” or 12 mm socket wrench, remove the lag bolts from the wall, then remove the wall plate.

You’ll need

HEAVY! You will need assistance

with this step.

Phillips screwdriver

7/16" (12 mm)

socket wrench

DX-DRTVM112_13-0668_MAN_V1_ENG.fm Page 14 Friday, July 19, 2013 10:37 AM

Contents

Main DX-DRTVM112 ASSEMBLY GUIDE Low-Profile T V Wall Mount Safety information and specifications Tools needed You will need the following tools to assemble your new TV wall mount: Package contents TV Hardware Bag Installation instructions STEP 1 - Determining the hole pattern on your TV 1 2 3 4 STEP 2 - Determine whether your TV has a flat, irregular, or obstructed back STEP 3 - Select screws and spacers 1 2 3 STEP 4 - Option 1: Attaching the mounting hardware to TVs with a flat back GE STEP 4 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs 1 2 3 A H F STEP 5 - Determine wall-mount location 1 2 3 4 STEP 6 - Option 1: Installing on a wood stud* wall Note: Any drywall covering the wall must not exceed 5/8" (16 mm). 1 2 3 template. STEP 6 - Option 2: Installing on a solid concrete* o r concrete block wall CAUTION: 1 2 3 B A A B A B STEP 8 - Removing the TV from the wall plate and disassembling the wall mount 1 2 B A