Manuals / Brands / TV and Video / TV Mount / Dynex / TV and Video / TV Mount

Dynex dx-drtvm112 STEP 4 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs

1 15

DX-DRTVM112 9

STEP 4 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs

1Align the TV bracket (A) with the screw holes on the back of the TV.

2Place spacers (H) behind the TV bracket and the washers (G) over the holes in the TV bracket, then insert

the screws (F) through the washers, TV bracket, and spacers.

3Tighten the screws until they are snug against the TV bracket. Do not over tighten.

You’ll need

G (4)

F (4)

Phillips screwdriver

Screws Washers Spacers

H (4)

TV bracket (A)

DX-DRTVM112_13-0668_MAN_V1_ENG.fm Page 9 Friday, July 19, 2013 10:37 AM

Contents

Main DX-DRTVM112 ASSEMBLY GUIDE Low-Profile T V Wall Mount Safety information and specifications Tools needed You will need the following tools to assemble your new TV wall mount: Package contents TV Hardware Bag Installation instructions STEP 1 - Determining the hole pattern on your TV 1 2 3 4 STEP 2 - Determine whether your TV has a flat, irregular, or obstructed back STEP 3 - Select screws and spacers 1 2 3 STEP 4 - Option 1: Attaching the mounting hardware to TVs with a flat back GE STEP 4 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs 1 2 3 A H F STEP 5 - Determine wall-mount location 1 2 3 4 STEP 6 - Option 1: Installing on a wood stud* wall Note: Any drywall covering the wall must not exceed 5/8" (16 mm). 1 2 3 template. STEP 6 - Option 2: Installing on a solid concrete* o r concrete block wall CAUTION: 1 2 3 B A A B A B STEP 8 - Removing the TV from the wall plate and disassembling the wall mount 1 2 B A