Dynex DX-FMRDS Using the mobile FM transmitter and charger, To set up and use your mobile FM transmitter and charger:, turns on when an audio signal is detected

6

Using the mobile FM transmitter and charger

To set up and use your mobile FM transmitter and charger:

1Insert the mobile FM transmitter firmly into your car’s cigarette lighter or power socket.

2Tune your car's FM stereo to an unused FM frequency.

3 Plug the connector on the end of the cable into your iPod.

Note: To disconnect, unplug it from your iPod. 4 Start your iPod player. Your mobile FM transmitter

turns on when an audio signal is detected.

5 Select the frequency from Step two above using the up and down arrows on the front of your mobile FM transmitter.

Tip: The mobile FM transmitter works best when the iPod volume is set between 50% to 75% of maximum. After you have tuned to the frequency and begun transmitting, adjust the volume to a comfortable level.

Tip: Your iPod may not automatically turn off. Be sure to unplug it to stop playback and to deactivate charging before exiting your car.