8

Using your mobile FM transmitter with an RDS-enabled radio receiver

To set up and use your mobile FM transmitter with an RDS-enabled radio receiver:

1Tune your receiver to the same frequency displayed on the face of the transmitter (or vice-versa).If your FM receiver is RDS enabled, the radio automatically shows 'Dynex' in its display (if no song is playing).

2Enable "AF" mode in your receiver for advanced functionality. (See your RDS-enabled receiver instruction manual for directions. Methods may vary.)

3Plug the connector on the end of the cable into your iPod.

4Start your iPod player. Your mobile FM transmitter turns on whenever an audio signal is detected.

5The song title is automatically displayed on the FM receiver after a few seconds.