Dynex DX-L32-10A Adjusting the picture, Adjusting the volume, Adjusting basic settings, Displaying additional information, Adjusting the TV picture, MUTE, Time

16	Adjusting the picture

Digital sub-channels

A digital TV signal transmits more data than an analog signal. This increase in data provides a better picture and sound with less static and interference. The increased data capacity also lets broadcasters fit several channels into the same bandwidth as an analog signal. Broadcasters may use these sub-channels to transmit a variety of information, such as weather forecasts, foreign languages, and commercials. A digital sub-channel is indicated by the main channel number, followed by a dot, then the sub-channel number. For example, 5.1 indicates sub-channel 1 of main channel 5.

Adjusting the volume

To adjust the volume:

•Press VOL+ or VOL– to increase or decrease the volume.

•Press MUTE to temporarily turn off all sound. Press MUTE again to restore the sound.

Adjusting basic settings

To adjust basic settings:

1Press MENU. The on-screen menu opens with the Picture menu displayed.

2Press or to highlight Setup, then press . The Setup menu opens.

3Pressorto highlight an option, then press ENTER to enter the sub menu. You can select:

•Parental Controls—Lets you control which programs/movies your children can watch, based on industry ratings.

•Time—Lets you set the clock and the sleep timer.

•Closed Caption—Lets you turn closed captioning on or off. Also lets you set closed caption options.

•Menu Settings—Lets you set menu language and menu transparency.

•VGA Settings—Lets you adjust picture settings to optimize a computer display.

•Input Label—Lets you label a device connected to your TV’s input jacks.

•Restore Default—Lets you reset most TV settings for the current source to factory default values.

•Audio Only—Lets you turn off the TV picture and listen to

audio only.

4Press MENU to return to the previous menu, or press EXIT to close the menu.

Displaying additional information

To display additional information:

1Press INFO to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution.

•Digital mode information—Displays channel number, station name, channel label (if preset), broadcast program name, TV rating, signal type, audio information, resolution, CC mode, current time, and current program start and end times.

•Analog mode information—Displays channel number, channel label (if preset), signal type, audio information, and resolution.

2Press GUIDE to show the digital program guide, which may show a list of available programs, program times, and program summaries, depending on the information provided by the broadcaster.