20

Changing channel settings

4Press or to highlight Auto Scan, then press ENTER. A confirmation box opens.

5Press or to select Yes, then press ENTER to start the scan. A progress box shows the progress of the scan.

Selecting the signal source

To select the signal source:

1Press MENU. The on-screen menu opens.

2Press or to highlight Channel, then press . The Channel menu opens.

3Press or to select Air or Cable.

4 Press EXIT to close the menu.

Hiding channels

You can delete channels from the channel list so that your TV skips the channels when you press CH/CH. You can still tune to the hidden channel by using the number buttons.

To hide a channel:

1Press MENU. The on-screen menu opens.

2Press or to highlight Channel, then press . The Channel menu opens.

3Press or to highlight Show/Hide, then press ENTER. The channel list opens.

4Press or to highlight the channel you want to hide (the default is to show the channel), then press ENTER to remove the check mark from the channel.

Note: If the list has more than one page, press or to scroll through the pages.

5Press EXIT to close the menu.