4

TV components

Note: You must pay attention to the direction of the stand on the 37” TV. The wide portion of the stand should go towards the front of the TV.

Table edge

4To remove the stand from the TV, perform these steps in reverse order.

Installing a wall-mount bracket

If you want to attach the TV to a wall-mount bracket (not provided), you should first remove the stand column.

To remove the stand column:

1Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched.

Remove four screws

Remove the stand column

Stand column

2Remove the four screws holding the stand column to your TV, then remove the stand column.

Note: The appearance of this product in these illustrations may differ from your actual product, and is for comparative purposes only.

To attach your TV to a wall-mount bracket:

Warning: These servicing instructions are for use by qualified service personnel only. To reduce the risk of hazards, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

1Remove the four screws holding the TV to its base, as described above.

2Remove the TV base.

3Secure the wall-mount bracket to the back of your TV using the four M6 screws provided with the bracket.

TV components

Front

#

Component
Description

 

 

 

1

Remote sensor

Receives signals from the remote control.

 

 

Do not block.

2

Power indicator

Lights blue when your TV is turned on.

 

 

Lights red when your TV is in standby mode.

Side

#

Component

Description

 

 

 

 

1

CH

/CH

Press to go to the next or previous channel

 

 

 

in the channel list.

2

VOL

/VOL

Press to increase or decrease the volume.

3

MENU

Press to open the on-screen menu.

4

INPUT

Press to select the video input source.

5(Power) button Press to turn on your TV. Press again to put

your TV in standby mode.