Setting up your TV/DVD combo

11

Connecting a VCR with an S-Video cable

An S-Video connection provides better video than a standard AV connection.

To connect a VCR with an S-Video cable:

1Make sure that your TV/DVD combo and the VCR are turned off.

2Connect an S-Video cable (not included) to the S-VIDEOjack on the back of your TV/DVD combo, then connect the other end of the cable to the S-VIDEO OUT jack on the VCR.

R AUDIO IN LVIDEO IN S-VIDEO

VCR

3Connect a standard audio cable (not included) to the R and L AUDIO jacks to the left of the VIDEO jack on the back of your TV/DVD combo, then connect the other end of the cable to the AUDIO OUT jacks on the VCR.

4Turn on your TV/DVD combo and the VCR.

5Press INPUT, press CH+ or CH– to select S-VIDEO, then press

ENTER.

Connecting a component video device

A component video device provides better video than an S-Video connection.

To connect a component video device:

1Make sure that your TV/DVD combo and the component video device are turned off.

2Connect a component video cable (not included) to the Pr, Pb, and Y jacks on the back of your TV/DVD combo, then connect the other end of the cable to the corresponding COMPONENT OUT jacks on the component video device.

Y

 

Pb

L

 

AUDIO

Pr

R

3Connect a standard audio cable (not included) to the R and L AUDIO jacks below the Pr, Pb, and Y jacks on the back of your TV/DVD combo, then connect the other end of the cable to the COMPONENT AUDIO OUT jacks on the VCR.

4Turn on your TV/DVD combo and the component video device.

5Press INPUT, press CH+ or CH– to select COMPONENT, then press ENTER.

Connecting an HDMI device

An HDMI connection provides the best video and audio. An HDMI cable carries both video and audio, so you do not need to make an audio connection.

To connect an HDMI device:

1Make sure that your TV/DVD combo and the HDMI device are turned off.

2Connect an HDMI cable (not included) to the HDMI jack on the back of your TV/DVD combo, then connect the other end of the cable to the HDMI OUT jack on the HDMI device.

HDMI

HDMI

3Press INPUT, press CH+ or CH– to select HDMI, then press

ENTER.