Dynex DX-LTDVD19-09 Selecting the video input source, Adjusting the volume, Changing TV channels, Displaying TV channel information, Adjusting the picture

Using the TV 13

3Press CH+ or CH– repeatedly to select Channel Scan, then press VOL+ or ENTER to start scanning for channels.

Video	Status: Scanning...	Antenna
	Analog Channels: 4
Audio
	Digital Channels: 3
Channel
Function
Lock

40%

Channel Scan EXIT Cancel

When the scan is complete, your TV/DVD combo displays the first channel in the channel list.

Selecting the video input source

To select the video input source:

1Press INPUT to open the Select Source menu, then press CH+ or CH– repeatedly to select the video input source. You can select TV, VIDEO, S-VIDEO,Component, DVD, PC, or HDMI.

2Press ENTER to confirm.

Adjusting the volume

To adjust the volume:

•Press VOL+ or VOL– to increase or decrease the volume.

•Press MUTE to turn off the sound. Press MUTE again or VOL+ to restore the sound.

Changing TV channels

To change TV channels:

•To tune directly to a channel, press the number buttons for the channel number.

•To go to the last viewed channel, press RECALL.

•To scroll through the channels in the channel list, press CH+ or CH–. For information about setting up the channel list, see “Setting up the channel list” on page 12.

•To select a channel from the channel list, press CH.LIST. The channel list opens. Press CH+ or CH– to select a channel, then press ENTER. If the channel list has more channels than can be displayed on the screen, press VOL+ or VOL– to got to the previous or next page in the list. For information about setting up the channel list, see “Setting up the channel list” on page 12.

•To select a digital sub-channel, press the number buttons for the main channel, press , then press the number button for the sub-channel. For example, to select digital channel 11.1, press 11, , then press 1.

•To select a channel in the favorite list, press FAVORITE. The favorite list opens. Press CH+ or CH– to select the channel you want, then press ENTER. For information about adding a channel to the favorite list, see “Adding a channel to the favorite list” on page 15.

Displaying TV channel information

To display TV channel information:

•Press DISPLAY. Your TV/DVD combo displays information about the current channel.

•Press DISPLAY again to close the channel information display. You can also wait a few seconds for the display to close automatically.

Adjusting the picture

To adjust the picture:

1Press MENU, then press CH+ or CH– repeatedly until the Video menu appears.

Video	Mode	Custom
	Brightness			50
Audio	Contrast			50
	Color			50
Channel	Tint			0
	Sharpness			50
Function	Color Temperature
	Advanced Video
Lock
Video	ENTER	Adjust	CH+/-	Select EXIT Back
			VOL+/-

2Press VOL+ or ENTER to open the Video menu.

3Press CH+ or CH– repeatedly to select Mode, then press VOL+ or VOL– to select Mild, Standard, Vivid, or Custom.

4Press CH+ or CH– to select the option you want to adjust, then press VOL+ or ENTER to confirm. You can select:

•Brightness—Adjusts the brightness.

•Contrast—Adjusts the contrast.

•Color—Adjusts the color saturation.

•Tint—Adjust the picture tone.

•Sharpness—Adjusts the detail enhancement. Increasing the sharpness makes the picture cleaner and clearer. Decreasing the sharpness makes the picture smoother.

•Color Temperature—Adjusts the color temperature. You can select Normal (give the white colors a neutral tint), Warm (gives the white colors a red tint), Cool (gives the white colors a blue tint), or Custom.

•Advanced Video—Adjusts advanced video options. For more information, see “Adjusting advanced video options” on page 13.

5Press VOL+ or VOL– to adjust the option.

6Repeat Steps 4 and 5 to adjust additional options.

Note: You can only adjust Brightness, Contrast, Color, Tint, Sharpness, and Color Temperature if you selected Custom.

Adjusting advanced video options

To adjust advanced video options:

1Press CH+ or CH– to select Advanced Video, then press VOL+ or ENTER to confirm.

2Press CH+ or CH– to select the option you want to adjust, then press VOL+ or ENTER to select. You can select:

•DNR—Digital Noise Reduction. Reduces the appearance of digitizing errors caused by compression. You can select Off, Weak, Medium, Strong, or Auto.

•Black Level Extender—Adjusts the black areas of the picture. You can select On or Off.

•White Peak Limiter—Adjust the white areas of the picture. You can select On or Off.

•CTI—Color Transient Intensity. Adjusts color errors in the picture. You can select Off, Weak, Medium, or Strong.

•Flesh Tone—Adjusts the flesh colors in the picture. You can select On or Off.

•Adaptive Luma Control—Adjusts the picture luminance. You can select On or Off.