Dynex DX-M300 Package Checklist, Part 1. Hardware Installation, Part 2. Installation Procedures

Package Checklist

DX-M300 56K Data/Fax USB Modem

Driver CD ROM

USB Cable

RJ-11 Cable

Quick Installation Guide

1

Part 1. Hardware Installation

1.Connect the A type plug of USB cable to an available USB port on the computer and the B type plug to this 56K modem DX-M300.

2.Plug RJ-11 cable into the PHONE jack on the modem; plug the other end into the phone. Lift the telephone handset and listen for a Dial Tone to check the connection.

Part 2. Installation Procedures

Driver installation for Windows 98SE

1.Once the device is properly connected to your computer, Windows O/S will detect the new hardware device automatically. Click Cancel.

2.Please click My Computer\CD-ROM\driver\Win98SE\Run HXFSetup.exe. Click OK.

3.Restart the computer. Windows will complete the driver installation automatically. Select Specify a location, and click Browse to search for driver files and open it, e.g., (CD- ROM) D:\DRIVER\Win98SE. Click Next.

4.Windows found the driver of this modem. Click Next. Click Finish to complete the installation.

Features

DX-M300 supports the following communication standards. ITU-T is also known as CCITT.

Data

V.92 (Lite)

V.90, V.34, V.32bis, V.32, V.22bis, V.21, V.22

Bell 103 & 212A

V.44, V.42bis & MNP 5 (Data compress)

V.42 & MNP2-4 (Error correction)

Fax

V.17 (14,400bps)

V.29 (9,600bps)

V.27 (4,800bps)

Voice

Voice/Audio mode

2

Driver installation for Windows 2000

1.Once you have completed the hardware installation, switch on your computer and put the CD into the CD-ROM. The wizard searches for new hardware. Click Next.

2.Select Search for a suitable driver for my device (Recommended) and click Next.

3.Select Specify a location and click Next.

4.Click Browse to search for driver files and open it, e.g., D:\driver\Win2000. Click OK.

5.Windows found the driver of this modem. Click Next.

6.Click Yes for Digital Signature.

7.Click Finish to complete the installation.

Driver installation for Windows ME

1.Once you have completed the hardware installation, switch on your computer and put the CD into the CD-ROM. The wizard searches for new hardware. Select Specify the location of the driver (Advanced) and click Next.

2.Select Search for the best driver for your device (Recommended) and Specify a location. (Please click Browse to search for driver files and open it, e.g., D:\driver\WinMe) and click Next.

3.Windows found the driver of this modem. Click Next.

4.Click Finish to complete the installation.

5.Windows has found the new hardware for modem device, please refer to above steps to complete the installation.

3 4