Setting up your DVD player

9

Connecting to the AC power adapterTo connect the AC power adapter:

1Make sure that the supplied AC power adapter is correct for your local voltage.

2Connect the supplied AC power adapter to the DC input jack on the left side of the player, then to the AC power outlet.

Connecting to the cigarette lighter adapter in a carTo connect the cigarette lighter adapter in a car:

•Connect the supplied cigarette lighter adapter to the DC input jack on the left side of the player, then to the automobile’s cigarette lighter socket.

Warning: To avoid traffic accidents, never wear headphones when driving a car or riding a bicycle.

Charging the built-in battery

To charge the battery:

1Turn off the player. The battery charges only when the power to the player is turned off.

2Connect the supplied AC power adapter to the DC input jack on the player, then plug the adapter into an AC power outlet.

When the battery is charging, the charge indicator LED turns red. When the battery is fully charged the indicator turns off.

3Unplug the AC power adapter when the battery is fully charged.

Notes:

-While the charging is in progress, do not disconnect the AC power adapter until the charge indicator LED turns off. The charging time of a battery is about 5 hours and depends on environmental conditions.

-To maximize battery life, immediately recharge it when it is fully discharged.

-Ni-Mh batteries do not have a “memory effect” and can be recharged at any time, regardless of whether the battery is fully or only partially discharged.

-The battery may get warm when you are charging it or operating the player. This is not a defect.

Using the remote control

To use the remote control:

1The first time you use the remote control, remove the plastic sheet from the bottom of the battery to activate the remote.

CR2025

Open

Push