Cross-Cut Paper Shredder 7
1Plug in the power cord.
2To begin shredding, locate the switch on the top of the shredder and select the On/Auto mode.
The green power LED indicates the shredder is on and ready to use.
Caution: Never shred paper clips, window or insulated envelopes, continuous forms,
newsprint, transparencies, laminated documents, cardboard, any items with adhesives,
hard materials, or plastic (except credit cards).
3Slide the paper or credit card into the feed opening. The shredder automatically starts after the
paper or credit card has been inserted. The shredder stops automatically when it has finished
shredding.
Maintaining
Caution: Failure to properly maintain your shredder will void the warranty.
• Crosscut shredders requ ire regular oil lubrication for optimal performance and extended
lifespan. We recommend you oil your shredder once a month. To lubricate your shredder,
drizzle some basic vegetable or cooking oil (nothing flammable or petroleum based) onto a
few sheets of paper and feed it into the shredder.
• Do not spray or keep any aerosol products in or around shredder.
• DO NOT USE CANNED AIR ON THE SHREDDER.
• Be sure to periodically empty the wastebasket to avoid overloading and damaging the cutting
mechanism.
To clean the shredder:
• ALWAYS UNPLUG THE SHREDDER BEFORE CLEANING!
• Only clean the shredder by carefully wiping the unit with a soft cloth or towel moistened with
mild soap and water. Dry the unit thoroughly.
• Do not clean or immerse the shredder in water. Having the unit wet may result in damage or
malfunction to the electrical components. If the shredder happens to get wet, be sure to
completely dry the unit immediately with a cloth or towel.
• Never use anything flammable to clean the shredder. This may result in serious injury or
damage to the product.
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 7 Thursday, June 27, 2013 2:04 PM