20

DX-WD1202

Step 14:

You may need to adjust the doors to make them fit correctly.

To adjust the doors from side to side (horizontal), loosen the mounting screw several turns, then turn the horizontal adjusting screw in or out. Tighten the mounting screw after making adjustments.

To adjust the doors up and down (vertical), loosen both vertical adjustment screws. Move the doors up or down to the best location. Tighten the screws after making adjustments. You can use a shim to help hold the door in place.

To adjust the doors in or out (depth), loosen the mounting screw one turn and move the doors in or out, as needed. Tighten the mounting screw after making adjustments.

Horizontal adjusting screw

Mounting screw (depth)

Vertical adjusting screws

Shim

You’ll need:

Phillips screwdriver

Shim

Need help? Call 800-305-2204