DX-WD1202

17

 

 

Step 11:

Carefully turn the unit so the front is facing down, then fasten the back (G) to the legs (I and J). Use a Phillips screwdriver and eight brown 7/16" large head screws (II).

Fasten the remaining back (G) to your stand using 33 nails (KK).

Note: Be sure to tap the nails into the holes that line up over the shelf (F). Perforations have been provided for access through the back. Carefully cut out the holes needed.

These holes must line up over shelf (D).

Caution: Do not stand your stand upright without the back fastened. Your stand may collapse.

You’ll need:

Phillips screwdriver

KK (33)

II (8)

Hammer

Need help? Call 800-305-2204