Sennheiser ASP 2 manual Connecting the antennas, Connecting the receivers

ASP 2

ASP 2

EM 500 G2

ASP 2

EM 500 G2

Connecting the antennas

￿You can connect the following antenna types to the

antenna inputs and :

!two A 1031-U or A 2003-U passive antennas or

!two A 12 active antennas or

!a combination of passive antenna (A 1031-U or A 2003-U) and antenna booster (AB 2).

Connecting the receivers

You can connect up to four rack-mount receivers (e.g. EM 100 G2, EM 300 G2 or EM 500 G2) to the ASP 2. The split- ter incorporates DC distribution for powering the receivers.

￿Pass the cables coming from the antenna spitter’s DC out-

puts	through the cable grips at the rear of the recei-
vers.

￿Insert the hollow jack plugs into the sockets of the recei- vers.

￿ Connect the BNC cables and of the antenna splitter to

the receivers as follows:
! Antenna outputs (OUT A)	to antenna inputs (ANT I)
! Antenna outputs (OUT B)	to antenna inputs (ANT II)

Note!

We recommend protecting unused RF outputs with a 50 Ω terminator in order to keep to the specified distribution attenuation.

18