If problems occur...
Error checklist
Problem | Possible cause | Possible solution |
|
|
|
Receivers cannot be | Receivers are not powered | Check the connections of |
switched on |
| the mains unit or the DC |
|
| connections |
|
|
|
Disturbed reception or no | Transmitting antennas are | Reduce the distance |
reception | not within the range of the | between transmitter and |
| receiving antennas | receiving antennas |
|
|
|
| Transmitters or receivers | Switch the transmitters or |
| are not switched on | receivers on |
|
|
|
| Antennas are not | Check the antenna |
| connected correctly | connections |
|
|
|
| Connecting cables are | Replace the connecting |
| defective | cables |
|
|
|
| Too high cable attenuation | Only use the |
| due to too long antenna | recommended antenna |
| cables or wrong type of | cables (see ”Accessories“ |
| antenna cable | on page 21) |
|
| or use shorter antenna |
|
| cables |
|
|
|
| Transmitters and receivers | See operating manual of |
| are not on the same | the transmitter or receiver |
| frequency |
|
|
|
|
If problems occur that are not listed above or if the problems cannot be solved with the proposed solutions, please contact your local Sennheiser agent for assistance.
20
