1. Getting started
Assemble the machine as follows:
Wand & hose assembly
Push yellow hose cuff firmly over wand end with twisting motion.
1
1 Guide wand into hose, keeping it straight.
2Locate wand handle into socket from above.
3Push home until it ‘clicks’ into place.
2
4
click
Ensure hose does not kink when replacing wand
4 Insert tool onto end of wand as shown.
5 For cleaning awkward places remove wand and insert tool adaptor into end of hose.
Attach tool as
required.
5 Tool adaptor
On/Off switch
P L E A S E R E A D A L L I N S T R U C T I O N S C A R E F U L LY BEFORE USING YOUR DYSON VACUUM CLEANER.
Accessory tool location
All tools are stored neatly on the tool storage posts.
Tool adaptor
Cord storage
Wrap cord around both cable winders.
Rotate top
...to release cable.
Cleaner head adjustment
Hold the cleaner head down with foot and tilt machine back.
Cleaner head adjusts automatically to correct height.