Dyson DCO1 IMPORTANT Use only genuine Dyson filters, which, Check both filters, as necessary

Models: DCO1

1 6
Download 6 pages 21.19 Kb
Page 6
Image 6
Electrostatic & HEPA filters

Important

 

S

Electrostatic & HEPA filters

AbsoluteAlways replace yellow S-levelfilter

 

S-Level

at least every 3 months

 

HEPAS-Level

Check both filters

 

Bactiguard Bactiguard and HEPA filter every 12 months.

 

 

 

whenever the bin is

 

 

 

emptied and replace

 

 

 

as necessary.

 

 

 

Please note that if the filters are not checked regularly and changed as required, the motor may overheat, which will cause the thermal cut-out to operate.

NOTE: Vacuuming builder’s dust and some carpet fresheners may cause the filters to require changing more frequently. (Dyson does not recommend the use of carpet fresheners).

Replacement filters are available from your local retailer ordirect from Dyson. Call or fax the Helpline for orders.

IMPORTANT: Use only genuine Dyson filters, which

 

have been tested and approved for this cleaner.

 

NOTE

 

 

 

 

 

Your Dyson has a built-in thermal cut-out to protect it in the

detailed in this operating manual. (Remember also to check the fuse in the

event of a restriction to the airflow and may suddenly stop

plug). Having established that there are no blockages and that the filters

working temporarily if you do not change the filters at thehave been replaced within the stated time, leave your vacuum cleaner
stated time, or if blockages are not cleared immediately.unplugged for 60 minutes and then try using it again.
If the vacuum cleaner suddenly stops working (ie. the motor makes noIf the vacuum cleaner still does not work, please call Dyson

sound when switched on) then please check your cleaner for blockages as

Customer Care (Tel: 01666 827272).

IMPORTANT A LWAY S U N P L U G T H E VAC U U M C L E A N E R F R O M T H E WA L L S O C K E T B E F O R E I N S P E C T I N G I T

NOTE

IMPORTANT

 

Check that your supply corresponds to that shown on the rating plate. The appliance must

The wires in the mains lead are coloured in accordance with the following codes.

only be used as rated, it should be fitted with an ASTA approved fuse to BS1362.

Brown – Live

 

European conformity information A sample of this product has been tested and found

 

Blue – Neutral

 

to be in conformity with the following European Directives: 73/23/EEC Low voltage (safety)

 

 

 

 

 

 

Directive, 93/68/EEC CE Marketing Directive and 89/336/EEC EMC Directive.

As the colours of the wires in the mains lead may not correspond with the colours or

 

For your convenience this appliance is supplied with a plug which is fitted with a 13amp

markings identifying the terminals in your plug, proceed as follows:

fuse of the appropriate rating.

The wire which is coloured Blue must be connected to the terminal which is marked with

Never put the plug into the socket outlet without the fuse cover fitted. Replacement fuse

the letter N or coloured Black.

 

covers are available from Dyson Customer Care. If the plug supplied is not suitable for

The wire that is coloured Brown must be connected to the terminal which is marked with

your socket outlet, it should be cut off and destroyed/safely disposed of. Warning: Under

no circumstances should the severed plug be inserted into a 13A socket, serious

the letter L or coloured Red.

 

danger of electric shock would result from the exposed wires.

Neither wire should be connected to the earth terminal of a three pin plug which is marked

The mains lead can then be shortened to the minimum required length, suitably prepared

with the letter E or

 

 

or coloured Green or Green and Yellow.

 

 

and the correct style of plug to suit your household wiring system should be fitted. The

Always ensure that the cable clamp is fitted and that it clamps the cable outer and NOT

following wiring instructions should be followed. If in doubt, consult a qualified

the coloured wires.

 

electrician.

 

 

 

 

 

 

Unwanted products and the environment Should you find that your product needs

If the supply cord of the appliance is damaged, disconnect the appliance from the socket

replacing one day, or is of no further use to you, think of protecting the environment. Dyson

outlet immediately. The supply cord must be replaced and only by Dyson Appliances Ltd.

will accept your old products and recycle them in an environmentally friendly way.

or their appointed agent as special purpose tools and service techniques are required.

Helpline

01666 827272

D Y S O N C U S T O M E R C A R E

T E T B U R Y H I L L

 

 

 

 

 

Facsimile

01666 827298

M A L M E S B U R Y

W I L T S H I R E

Contact for all service assistance

E N G L A N D

 

 

 

 

 

 

 

 

 

 

S N 1 6 O R P

Page 6
Image 6
Dyson DCO1 IMPORTANT Use only genuine Dyson filters, which, have been tested and approved for this cleaner, as necessary