Earlex IS2000 manual Uses for your Floor Cleaner, Window/Tile Cleaner

Uses for your Floor Cleaner

The Floor Cleaner can be used on many types of surfaces such as ceramic, marble, linoleum, stone, parquet etc. Be especially careful with parquet – older oak floors are very tough but on some newer floors steam may cause the blocks to swell. Always take advice from the manufacturer of the floor covering before proceeding to use steam. One useful point to note is that steam will cause animal hairs, that have collected on floors and fabrics to roll into easily removable balls.

This attachment can also be used on car interiors, motor homes, painted doors, walls, louvers etc. IMPORTANT - When cleaning hard floors there may be a small residue of water that will ultimately evaporate. If preferred, use a dry cloth attached to the Floor Cleaner (steamer turned off) and wipe area dry.

We do not recommend using this product on self adhesive vinyl tiles.

Window/Tile Cleaner (28)

When cleaning exterior glass be careful not to pick up grit particles on the rubber blade as this could scratch the glass.

Antique glass and stained glass may be brittle and can crack under extreme temperatures.

Do not use on glass when the temperature is below 0˚C.

IMPORTANT – You should only proceed at your own risk

The Window Tile Cleaner can be used fitted directly onto the Hose Handle or fitted to one or both Extension Tubes, whichever is best for the job in hand.

As the attachment is moved down the window (mirror or tiles) and the Steam Release Button is pressed, the rubber blade will clean away the dirt as it wipes the surface after the steam has been applied. After you have completely finished cleaning, release the Steam Button and clean the surface from top to bottom with the rubber blade only. Excess water from around the window should be removed with a dry cloth.

Steam will completely remove dust, film or greasy marks from windows, mirrors, tiles and patio doors. It will remove soap and grease residues but cannot remove deposits of scale. To remove black marks from grouting or difficult corners use the mini attachments, Jet Nozzle, Brush Nozzle or Scraper Nozzle.

Upholstery Cleaner/Clothes Steamer (29)

IMPORTANT – Some upholstery, fabrics and soft furnishings have stain resistant treatments, which, may be affected by steam cleaning. Try cleaning a small area of material that is normally unseen, then allow 24 hours before checking whether there have been any unusual effects on the material. If so, DO NOT CONTINUE. Check with your material supplier

for further advice. Do not allow the material to become soaked. You only require a small amount of steam to clean, and soaking can leave water marks or cause bleed through linings etc.

The Upholstery Cleaner can be used either with or without the Bonnet (32). For normal cleaning purposes and for general use the Bonnet would be fitted. When removing creases from garments and hanging curtains you can sometimes improve the appearance of the material by using the head without the Bonnet attached. It is best to experiment to get the best finish for you.

This tool can also be used either fitted directly onto the Hose Handle or fitted to one or both Extension Tubes. Firstly select which is best for the task in hand and assemble together.

HELPLINE NUMBER - 01483 454666. CALL FIRST IF YOU HAVE ANY PROBLEM

10