PREPARING YOUR STEAM CADDY FOR USE
Fitting the Boiler Unit (1) to the Caddy (18)
Slide the Boiler into the centre of the Caddy until the yellow boiler release latch (24) locks into place. To remove, press the boiler release latch down and slide the Boiler backwards.
Storing the Handle (11), Hose (10) & Mains
Cable (17)
With the Steam Handle uncoiled in front of the unit take the Mains Cable, and coil it tightly around the base of the Boiler above the steam hose outlet so
that after 41/2 turns the plug can be stored in the front recess (22). Then coil the hose 11/2 turns until the Handle parks into its Holster (2). Press down the Handle Release Button (12) and push the Handle into the Holster so that the release button locks into its location. To remove, simply depress the release button and withdraw the Handle.
Storing and removing Extension Tubes (25)
Slide the Extension Tubes into the front of the Caddy, button end first and slide the tubes through the Caddy until the Release Button (20) aligns and fits into the location (19). To remove, simply depress the release button and withdraw the Extension Tube. Note: It will be easier to do this when the main attachments are not stored in the Caddy.
Using the Shoulder Strap (33)
The Strap is used for the hand held function to enable the user to carry the Boiler unit over the shoulder. To unfasten the strap, release the popper
(6) and pull the strap out at the front end of the
Boiler until it is fully extended. The Boiler Unit can now be hung over your shoulder.
Fitting the Extension Tubes & Attachments
There are 3 Main Attachments (27, 28, 29), 3 Mini Attachments (14, 15, 16), 2 Extension Tubes and a Clothing Attachment Rest (30) to use with your Steam Caddy, depending on the job you want to do. All attachments are fitted either to the Extension Tubes or directly to the Handle, which ever is most suitable for the task in hand.
●
●
The Main Attachments and the Extension Tubes fit over the release button.
The Mini Attachments push tightly over just the front portion of the Handle or Extension Tube.
HELPLINE NUMBER - 01483 454666. CALL FIRST IF YOU HAVE ANY PROBLEM
8
