Earlex Pure Steam Cleaner manual Component List, Castors, Assembling the Accessories

COMPONENT LIST

a

d l

e

j

		h
		k
b	c	g
		f
		i

a. Boiler		F78
b	Floor Cleaning Tool	AC254
c	Towel for Floor Cleaning Tool	AC275
d	Upholstery Cleaning Tool	AC250
e	Towel for Upholstery Cleaning Tool	AC276
f	Window/Tile Cleaner	AC258
g	Jet Nozzle	AC262
h	Scraper	AC21
i	Brush	AC25
j	Long Handle (3 tubes)	AC01
k	Universal Handle	AC302
l	3.65 metre Steam Hose	ST94
m Castors (not shown)		F17
n	3 Metre Cord Set (not shown)	B17

CASTORS

The castors are packed separately. Turn the boiler upside down and insert the 3 castors. These should be pushed in hard until they stop. Once installed these remain in place permanently.

ASSEMBLING THE ACCESSORIES

The Universal Handle is used in conjunction with the Floor Cleaner, Upholstery Cleaner, Window / Tile Cleaner and Jet Nozzle. Align the outline triangle on the handle with the triangle on the accessory. Push the handle into the accessory and twist so that the solid triangles on the handle and accessory are aligned (Fig.1).

Over time, you may find that your steam cleaning accessories become awkward to assemble to the universal handle. This is due to the steam reducing the lubrication properties of the ‘O’ ring seals. In this event, simply lubricate the ‘O’ ring seals as illustrated (Fig.2) using washing-up liquid or furniture polish.

The Long Handle Attachment is designed to be used when cleaning floors or hard to reach areas. To assemble, pass hose through each of the long handle sections, in at the small end out at the large end. Screw the hose nut onto the universal handle and push the

long handle tube sections together and onto the taper on the universal handle (Fig.3). You can use one, two or three sections of the long handle. Disconnect in reverse order. If you have any difficulty in disconnecting twist the handles apart.

Fig.1

Assembling

Universal

Handle

Fig.2 Seal Lubrication