Customer Tips
dc09cc0453 June 10, 2009
PDL Reference Guide for the WorkCentre 7425/7428/7435
Accessing Extended Features
This document applies to the stated Xerox product. It is assumed that your device is equipped with the appropriate option(s) to support the information within this document.
Overview
This document enables you to access the extended features of the WorkCentre 7425/7428/7435 in environments that do not have a custom print driver.
Note: The commands and syntax used in this document requires familiarity with either PostScript (PS) or Printer Command Language (PCL).
This document provides the Printer Description Language (PDL) commands and syntax for each feature. The following items are also included:
•A PCL table that describes the PCL features the WorkCentre supports and the syntax to use the feature.
•A PS table that describes the PS features the WorkCentre supports and the syntax to use the feature.
This document is not intended to be a complete PS or PCL reference manual. It is a guide for using the PS and PCL commands with the WorkCentre 7425/7428/7435. Refer to these sources for additional PS and PCL information:
•PostScript Language Reference Manual, Third Edition, ISBN
•PCL5 Printer Language Technical Reference Manual
(http://h20000.www2.hp.com/bc/docs/support/SupportManual/bpl13210/bpl13210.pdf),
•Printer Job Language Technical Reference Manual
(http://h20000.www2.hp.com/bc/docs/support/SupportManual/bpl13208/bpl13208.pdf), a
Using this Guide
Search the Feature Table to determine whether the feature you wish to use is supported.
Verify that the feature is supported by the platform. For example, the WorkCentre must have an optional finisher installed to use stapling commands.
Follow across the table to find the syntax listed for the PDL examples shown. Reference the “Dependencies/Caveats” section when working with PS and/or PCL commands.
dc09cc0453
Customer Support | Page 1 |
