Xerox 7425/7428/7435 manual Feature, Implementation, Values, dc09cc0453, Customer Support, Page

Feature	Implementation		Values
Punch	<</Punch int1	Where int1 is one of the following:
(w/ C-	/PunchDetails << /Type 5	0	= Do not punch*
Finisher)	/Position int2	3	= Do punch by set unit.
	/Numholes int3 >>	Where int2 is one of the following:
	>>	0	= topside
	setpagedevice	1	= bottom side
		2	= left side
		3	= right side
		Where int3 is one of the following:
		2	= 2 holes*
		3	= 3 holes
		4	= 4 holes
Booklet	<</Booklet value1	Where value1 is one of the following:
(w/ C-Finisher	/BookletDetails << /Type 3	true = Do Booklet
and booklet	/StapleType int	false = Do not Booklet*
module)	/PrintInside value2	Where int is one of the following:
	/PageSet value3>>	0	= Do not file on inside*
	>>	1	= File on inside
	setpagedevice	Where value2 is one of the following:
		true = Print on inside*
		false = Print on outside
		This feature is effective only in conjunction
		when StapleType is 0.
		Where value3 is one of the following:
		true = Integrate several page and folds
		false = Fold every page
		This feature is effective only in conjunction
		with when StapleType is 0.
Interleaving	<</SlipSheet int1	Where int1 is one of the following:
Paper	/SlipSheetDetails << /Type 1	0	= Do not deliver interleaving paper*
(Transparency	/AutoTraySelect int2	4	= Deliver interleaving paper at the end
Separator)	/SheetTray int3		of each page
	/MediaClass (string) >>	Where int2 is one of the following:
	>>	0	= SheetTray is referred and feed
	setpagedevice		interleaving paper from the
			SheetTray
		1	= Feed interleaving paper from a tray
			following system setting. SheetTray is
			not referred*
		Where int3 is one of the following:
		0	= Feed interleaving paper from Tray1*
		1	= Tray2
		2	= Tray3
		3	= Tray4
		100 = Tray5 (Bypass)
		Where string is same as the “Media Class”
		feature. It means media class for the
		interleaving paper.

dc09cc0453

Customer Support Page 21