Xerox 7425/7428/7435 value1, BIFOLDMULTIOUTSIDE：Bi-Foldingmulti, Feature, Implementation, Values

Feature		Implementation					Values
Punch		@PJL	SET	PUNCH	=		Where value1 is one of the following:
		value1					TOP
							RIGHT
							LEFT
							BOTTOM
		@PJL	SET	JOBATTR	=		NONE
							Where value2 is one of the following:
		”@PNHN = value2”					TWO: 2 holes
							THREE: 3 holes
							FOUR: 4 holes
Folding	@PJL		SET	JOBATTR	=		Where value1 is one of the following:
		"@FOLD = value1"					BIFOLDINSIDE ：Bi-Folding(single page)
							BIFOLDMULTIOUTSIDE：Bi-Folding(multi
							page)
							The "Collated" feature needs to be enabled for
							the booklet functions to work.
Booklet	@PJL		SET	JOBATTR	=		Where value1 is one of the following:
		“@BKLT = value1”					NONEDIVIDE: Compile a booklet as long
							as the number of sheet does not exceed the
							limit
							AUTODIVIDE: Divide sheets into sets
							automatically in case of exceeding the limit
							number of sheets.
							MANUALDIVIDE : Divide sheets based on
							the specified limit manually
							OFF : Do not compile a booklet
		@PJL	SET	JOBATTR	=		Where value2 is one of the following:
							RIGHT = Right to left page order binding
		“@BKSG = value2”
							LEFT = Left to right page order binding
		@PJL	SET	JOBATTR	=		Where int1 is:
		“@BKDN = int1”					1-9999 = Booklet dividing number for each
							set
		@PJL	SET	JOBATTR	=		Where int2 is:
		“@BKDN = int2”					1 - 9999 = Booklet total pages of document
Collation	@PJL SET QTY = int						Where int is:
						1 - 999
Resolution		@PJL SET RESOLUTION =					Where value is one of the following:
		value				600
						1200
Bits Per Pixel	@PJL SET BITSPERPIXEL						Where value is one of the following:
		= value					1: 1 bit per pixel (per plane)
Quantity	@PJL SET COPIES = int						Where int is:
						1-999
							(This parameter used for uncollated mode.)

dc09cc0453

Customer Support Page 6