3.Wear suitable gloves to reduce the vibration effects on the user.
4.Use tools with the lowest vibration when there is a choice.
5.Include
6.Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work.
7.To reduce vibration, maintain tool as explained in this manual. If abnormal vibration occurs, stop immediately.
SAVE THESE
INSTRUCTIONS.
FUNCTIONAL DESCRIPTION
Specifications
Maximum Air Pressure | 90 PSI |
Air Inlet | 1/4” |
Drive Size | 3/8” Square Drive |
Maximum Speed* | 11,000 RPM |
Average Air Consumption | 4.0 SCFM @ 90 PSI |
Maximum Torque | 200 |
Torque Range | |
Blows Per Minute (BPM) | 1660 |
Standard Bolt Size | 7/16” |
Recommended Hose Size | 3/8” |
*Maximum speed at stated maximum air pressure. Excess air pressure is hazardous and may cause the tool to exceed stated maximum speed.
INITIAL TOOL SET UP/
ASSEMBLY
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
•This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up.
SKU 92453 | For technical questions, please call | Page 6 |
