Assembling the Custom Grille (continued)
STEP#4 |
| STEP#8 |
|
|
|
Wrap cloth around frame and put into place with provided security ring.
STEP#5
Once you have the cloth in place with security ring push the ring enough to keep in place, though the groove with cloth underneath.
STEP#6
Now that you have pressed the security ring in by hand, use your rubber mallet to finish securing it completely in the gap.
STEP#7
With your security ring in place you can begin cutting excess cloth from the inner ring. Use extreme caution if you choose to use a straight razor instead of a box cutter or scissors.
This is what the inside of your grille should look like. Pouring a quick drying glue over the ring and in the space around where the cloth is will add more support and provide a hard shell.
STEP#9
This is what your finished product should look like on and off of the sub.
STEP#10
When you have completed the project you simply push the grille into the front of the
10 Earthquake Sound Corp. (510)
