Installing Your THOR
STEP#1
To begin you will need to locate the empty grille frame. Use your stud finder to locate the studs (if you’re not retrofitting). Using the empty frame, trace your cut line with a pencil. Once you are satisfied with your cut line, begin your cut using the sheet rock saw.
STEP#2
STEP#3
Note:
These pieces are sheet rock
stabilizers, not brackets.
In the first image furthest to the left you’ll notice the fastener in it’s neutral position– this is how it is packed. You will need to turn all fasteners outward so that they can be clamped to the sheet rock. You will tighten them from the front once you have fastened the THOR to the studs.
STEP#4
Note:
Accuracy of stud distance may vary from frame to frame. It will depend on the quality of the construction work.
When the cutout is complete, it should look similar to the image. Most of the work performed here is installer common sense, please use it.
Once you have fed all wiring and connected it, slip the THOR in the wall making sure that the sheet rock stabilizers are in the correct position.
Begin placing screws inside holes directly into the stud from the front. Once you have inserted all screws snugly and securely, tighten the fasteners.
8 Earthquake Sound Corp. (510)