26 EATON 350 Series Dual Path Mobile Pumps E-PUPI-TS006-E September 2007
Assembly
Swash Plate Sub-Assembly
Step 1
Press 15mm diameter dowel
pin (item 5) into opening at
end of swash arm (item 2).
Step 2
Insert 2 Drive-Lok dowel pins
(item 6) into smooth-bore holes
in swash plate (item 1).
Step 3
Align smooth-bore holes in flat
surface of swash arm with
Drive-Lok pins; fit swash arm
to swash plate and press parts
togetherwith an arbor press.
Step 4
Place assembled swash plate
and swash arm on a stable
work surface, with swash arm
pointing up.
Step 5
Fit together two Nord-Lock
washers( i tem 3) so th a t
the stepped faces match, and
the faces with radial teeth face
out. Assemble another pair of
washers the same way.
Step 6
Place one pair of washers on
each shoulder of the swash
arm, aligned with the threaded
holes.
Step 7
Insert an M10 x 1.25 x 40mm
socket-head cap screw (item 4)
through each pair of washers
and into threads; tighten to 79
n/m (58 lb/ft).
Note:
Disassembly of the Swash Plate
and Manual Servo Controller is
the reverse of the assembly
processes outlined starting on
page 25 in this manual.
4
4
3
5
2
6
1
7
7

1 5990297-001 1 Swashplate

2 4999620-001 1 Arm, Swash

3 5987468-016 2 Washer, Nord-Lock

4 5996773-040 2 Hex Socket Head Cap Screw

5 5986958-001 1 Dowel Pin

6 5987967-001 2 Driv-Lok Pin

7 5991097-001 2 Bearing, Swash

REF PART NO. QTY. DESCRIPTION